Page 1 of 1
Will's #07 Raptor Edition Jeep
Posted: January 30th, 2012, 7:45 pm
by wGraves
Well I purchased my Jeep a few months ago and with the amount of body work needing to be done to the jeep I have decided not to go the normal route with my jeep. Once Spring rolls around I'm going to be doing some massive tub repair. So with this being said I wanted to change it up a bit. So I'm naming my jeep the Raptor Edition. It will have a slight lift, mud tires, and any other features I come up with along the way. Going to look at some rims tomorrow. Here is a picture of the Jeep the day I got it.
The Reason I picked 07 for my number is because it was the year my daughter was born. I can't wait to drive her around in the jeep with the top off.
This build is going to be long... Not a quick one, I don't expect this to be done before Fall of this year, but dang close.
Re: Will's #07 Raptor Edition Jeep
Posted: January 30th, 2012, 10:18 pm
by cpltony
You can't rush perfection
Be sure to post progress photos!!
Re: Will's #07 Raptor Edition Jeep
Posted: February 2nd, 2012, 4:47 pm
by wGraves
Well scratch the rims for a bit, found a good deal on a hard top so I picked that up instead. Will probably do a write up on my repair and restoration of the hardtop. More to come!
Re: Will's #07 Raptor Edition Jeep
Posted: February 3rd, 2012, 9:57 am
by DrewSmith007
Very interested in the hardtop writeup. Good luck!
Re: Will's #07 Raptor Edition Jeep
Posted: February 5th, 2012, 12:57 pm
by weapon lxxxi
Second that with the hard top progress! Good luck
Re: Will's #07 Raptor Edition Jeep
Posted: March 23rd, 2012, 5:29 pm
by wGraves
The Hard Top was put on the jeep about a month ago, Didn't get a chance to do any repairs to it just yet. But I've decided that I enjoy the soft top better. When It gets warm enough out to take the top off its coming off and staying off. Still going to restore it, and most likely sell it. Going to do a write up but I have some great news coming tomorrow

Re: Will's #07 Raptor Edition Jeep
Posted: March 24th, 2012, 4:19 pm
by wGraves
SEATS!!!!!
Drove 2 and a half hours to pick these up. A few little defects but nothing I can't fix. Gotta put the rear pouches back on but I'm pretty excited to get rid of the torn up old seats.
Re: Will's #07 Raptor Edition Jeep
Posted: March 25th, 2012, 12:26 pm
by Henrique_Z_Tomassi
Great seats and a beautiful jeep, Will.
I'm waiting for the progress pictures!
Re: Will's #07 Raptor Edition Jeep
Posted: March 31st, 2012, 6:34 pm
by wGraves
Another little update. Went and picked up 4 Correct rims today plus one steelie for $75. They are a bit rough in spots but after a good sand blasting and paint they will do alright.
That should be all the Jeep parts but the soft top and one more rim. I'm getting very excited about this. It's all coming together. So far here's the conversion costs.
1992 Jeep Wrangler 2.5L 4 cyl- Recieved in Trade for 1994 Chevy Z71 Extended Cab Pickup.
1993 Sahara Seats- $300
4 Accurate Rims-$75
Total To Date for Conversion-$375.
Of Course this cost is only parts for the conversion. I've honestly spend $500 or more on engine work and Misc things since I've had the jeep. This is also doing all the labor myself.
Things to Do-
Rust Repair
-Patch Panels are going to run roughly $150
Exterior Paint
-Price to be determined
Interior Tub Liner
-Raptor Liner Kit $122
New Soft Top
-Bestop Replace-a-Top in Spice $470
Tires
- Haven't decided on what size just yet.
I'll post another update. Next up Body Work!
Re: Will's #07 Raptor Edition Jeep
Posted: March 31st, 2012, 9:58 pm
by Ammonites
Looking good so far, glad you included a pic of the back seats. You don't see too many of those.